LV10 Switch-Tek Vertical Buoyancy Level Switch

Product Description

LV10 Switch-Tek Vertical Buoyancy Level Switch

Documentation

LV10 Spec Sheet

LV10 Manual

The general purpose buoyancy level switch is a perfect choice for relatively clean water and chemical solution with non-coating and/or scaling characteristics. Media examples include acetic acid and process water. The baffle body eliminates switch chatter caused by turbulence. The dry contact closure provides a reliable switch interface with remote devices such as a PLC, SCADA or alarm. The sensor mounts vertically inside the tank on our Smart Trak or Switch-Pak fittings

Features
Baffle body and dynamically stabilized float eliminate turbulence switch chatter
PP or PVDF sensor and cable rated NEMA 6 or IP68
15 VA dry contact with selectable NO or NC state via wire selection
Compatible with Flowline controller, alarm and fitting accessories

• Tech Tip
  For years of reliable service in highly corrosive media, select the PVDF material option (LV10-5301). The rugged sensor features a PVDF body with a PFA cable. It's level made simple!

  
  
  Specification
  

  Model	LV10-1301	LV10-5301
  Orientation	±20° Vertical
  Accuracy	±2 mm in water
  Repeatability	±1 mm in water
  Specific Gravity	0.8 minimum
  Contact Type	(1) SPDT reed
  Contact Rating	15 VA
  Process Temperature	-40 to 176°F / -40 to 80°C
  Pressure	25 psi (2 bar) @ 25°C, derated @ 1.667 psi (0.113 bar) per °C above 25°C
  Sensor Rating	NEMA 6 (IP68)
  Sensor Material	PP	PVDF
  Cable Jacket Material	PP	PFA
  Cable Type	3-conductor, #22 AWG (shielded)
  Cable Length	10 ft / 3 m
  Process Mount	3/4 inch NPT
  Classification	General purpose
  CE Compliance	EN 61326 EMC EN 61010-1 safety