Accessories

  • ORP468 Calibration Solutions ORP468 Calibration Solutions

    ORP468 Calibration Solutions

    Our solutions help provide a standard known value to calibrate and adjust instruments for higher accuracy and reliability. ORP Calibration Solutions provide a standard known value to calibrate and adjust instruments for higher accuracy and reliability...
    $6.95 - $95.00
    Choose Options
  • PH04 Calibration Solutions PH04 Calibration Solutions

    PH04 Calibration Solutions

    pH Calibration Solutions provide a standard known value to calibrate and adjust instruments for higher accuracy and reliability. The calibration solutions for pH and ORP are color-coded and available in three volumes: 4 oz., 16 oz. and (1) gallon.
    $3.95 - $30.00
    Choose Options
  • PH10 Calibration Solutions PH10 Calibration Solutions

    PH10 Calibration Solutions

    pH Calibration Solutions provide a standard known value to calibrate and adjust instruments for higher accuracy and reliability. The calibration solutions for pH and ORP are color-coded and available in three volumes: 4 oz., 16 oz. and (1) gallon.
    $3.95 - $30.00
    Choose Options
  • PH07 Calibration Solutions PH07 Calibration Solutions

    PH07 Calibration Solutions

    Our solutions help provide a standard known value to calibrate and adjust instruments for higher accuracy and reliability. pH Calibration Solutions provide a standard known value to calibrate and adjust instruments for higher accuracy and reliability...
    $3.95 - $30.00
    Choose Options
  • Temperature probe

    Stainless Steel Basic Probe (316SS)

    The A203 is a 6in (15cm) high temperature immersion probe. Made of 316 stainless steel it is suitable (stainless steel tip only) for temperatures up to 2000F. Compatible with all K-TC units.
    $187.50
    Add to Cart
  • Probe dust filter

    Probe Dust Filter

    The electronic temperature and humidity sensor is the most critical component on an instrument.  The Dust filter protects that sensor by preventing debris from entering your temperature/humidity probe.  Use of the filter can dramatically extend...
    $58.50
    Add to Cart
  • Piercing probe

    Piercing Probe, 5' coiled cable

    The D605 is a 4in (10cm) piercing temperature probe with coiled cable. Made of 316 stainless steel it is suitable for temperatures up to 1650F. Compatible with all K-TC units.
    $109.50
    Add to Cart
  • Locking wall mount case

    Locking Wall Mount Case

    Use the locking wall-mounted case (small) for protecting a logger from tampering when protecting the reliability of your data is important.
    $78.00
    Add to Cart
  • Immersion Probe, 5" coiled cable

    Immersion Probe, 5" coiled cable

    The D608 is a 5-inch piercing temperature probe with coiled cable. Made of 316 stainless steel it is suitable for temperatures up to 1650F. Compatible with all K-TC units.
    $127.50
    Add to Cart
  • 8" chart

    Charts for Variable Input Recorder

    These 8″ chart come in packs of 60 and are designed for 8″ Chart Recorders. Only genuine Dickson charts are required for your chart recorder to read accurately.   Variable Input Recorder Charts Output Range 24...
    $53.89
    Choose Options
  • 6" chart 6" chart

    Charts for ET601 Circular Recorder

    These 6″ chart come in packs of 60 and are designed for 6″ Chart Recorders. Only genuine Dickson charts are required for your chart recorder to read accurately.
    $54.59 - $67.50
    Choose Options
  • Probe extension cable

    Probe extension cable

    This is an extension cable with the straight connector for data loggers compatible with Replaceable Sensors. Dickson’s Replaceable Sensors are the easiest and quickest option for re-calibrating a compatible monitoring device. When your data logger...
    $58.80 - $148.05
    Choose Options
  • Paper (1 Roll) pH 0-14 1 Hour Markings Paper (1 Roll) pH 0-14 1 Hour Markings

    Paper (1 Roll) pH 0-14 1 Hour Markings

    The Graphic Controls Rustrak RTI C-6803 Strip Chart Paper is pressure-sensitive strip chart paper for the Graphic Controls Rustrak Recorder. FeaturesChart size 2.563" X 63'Grid color: khaki0-14 pH markingsTime markings 1-12, one inch per hour chart...
    $34.52
    Add to Cart
  • Paper (1 Roll) 0-50 Division Paper

    Paper (1 Roll) 0-50 Division Paper

    The Graphic Controls Rustrak RTI 2279 Strip Chart Paper is pressure-sensitive strip chart paper for the Graphic Controls Rustrak Recorder. FeaturesChart size: 2-7/16" wide by 63 feet lengthGrid color: khaki10 major divisions, 50 minor divisionsTime...
    $30.41
    Add to Cart
  • Surface Mount Bracket

    Surface Mount Bracket

    Securely mount fence systems onto hard surfaces such as concrete and decking with this sturdy and reliable Mount Bracket. Formed from a powder coated steel for strength and durability, simply secure to a flat surface, insert a fence post and secure...
    $45.87
    Add to Cart
  • Splashproof Back Cover Kit

    Splashproof Back Cover Kit

    Make the most of your GF Signet flowmeters with these replacement parts and other accessories Optimize performance of your flowmeter with these accessories These mounting, installation, and replacement parts are suitable for use with your GF Signet...
    $67.27
    Add to Cart
  • Retrofit Adapter Kit

    Retrofit Adapter Kit

    Make the most of your Masterflex flowmeters with these replacement parts and other accessories Optimize performance of your flowmeter with these accessories Replacement sensors, mounting and installation kits, and other items to update flow...
    $48.93
    Add to Cart
  • Liquid Tight Connector Kit

    Liquid Tight Connector Kit

    Use with Sealproof straight or right angle connectors; can be used with any Type B metallic or nonmetallic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs Resists corrosion, abrasion, oil, water, acid, metal shavings, and...
    $71.35
    Add to Cart
  • Zero oxygen calibration solution

    Zero oxygen calibration solution

    Oakton® zero oxygen standard solution ensures accuracy of your dissolved oxygen meter. For accurate dissolved oxygen blanking, the solution undergoes testing using the Winkler method. Follow all precautions recommended by your electrode...
    $29.75
    Add to Cart
  • Submersible pH electrode Single junction

    Submersible pH electrode Single junction

    Update, upgrade, or replace electrodes to get the best out of Oakton® meters Choose from pH or ORP electrodes Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample.
    $188.16
    Add to Cart
  • Replacement membrane assembly

    Replacement membrane assembly

    Optimize performance of your Oakton® dissolved oxygen meter Keep your Oakton® DO meter running properly with these replacement membranes and caps Ensure top performance of your Oakton® dissolved oxygen meter with replacement membranes and...
    $136.02
    Add to Cart
  • Replacement HDPE membranes (pack of 25)

    Replacement HDPE membranes (pack of 25)

    Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample. Requires tool 35640-79 for replacement. Optimize water analysis. Choose from a variety of accessories
    $132.20
    Add to Cart
  • Replacement HDPE membranes

    Replacement HDPE membranes

    Optimize performance of your Oakton® dissolved oxygen meter Keep your Oakton® DO meter running properly with these replacement membranes and caps Ensure top performance of your Oakton® dissolved oxygen meter with replacement membranes and...
    $41.25
    Add to Cart
  • Replacement electrolyte solution

    Replacement electrolyte solution

    Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample. Compatible with Oakton DO probes, 35640-50 & 35640-52. Optimize water analysis. Choose from a variety of accessories
    $62.10
    Add to Cart
  • Replacement electrolyte powder

    Replacement electrolyte powder

    Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample. Add to 500 mL of DI water to make 500 mL of electrolyte. Optimize water analysis. Choose from a variety of accessories. Use with...
    $44.36
    Add to Cart
  • Membrane installation tool

    Membrane installation tool

    Optimize performance of your Oakton® Dissolved Oxygen Meter Keep your Oakton Dissolved Oxygen Meter running smoothly Choose from a wide range of replacement parts and accessories to ensure top performance of your Oakton DO meter.
    $67.20
    Add to Cart
  • Conductivity Cell K=1 PT 100

    Conductivity Cell K=1 PT 100

    Economical replacements for a variety of controllers Ten-foot cables with stripped ends Flow-through, in-line, swage, and dip styles available Cells withstand pressures up to 150 psi (at 135°C for SS; 25°C for CPVC and PVDF).
    $264.00
    Add to Cart
  • HI7032L Calibration solution TDS 1382ppm HI7032L Calibration solution TDS 1382ppm

    HI7032L Calibration solution TDS 1382ppm

    HI7032L is a premium quality 1,382 mg/L (ppm) TDS calibration solution that is prepared against a NIST traceable potassium chloride solution. Hanna TDS solutions have the lot number and expiration date clearly marked on the label and are air tight with a...
    $31.20
    Add to Cart
  • HI7031L Calibration solution conductivity 1413 uS HI7031L Calibration solution conductivity 1413 uS

    HI7031L Calibration solution conductivity 1413 uS

    HI7031L is a premium quality 1,413 µS/cm conductivity standard that is prepared against a NIST traceable potassium chloride solution. Hanna conductivity solutions have the lot number and expiration date clearly marked on the label and are air tight...
    $31.20
    Add to Cart
  • Oakton® Power Adapter, 9VDC to 110VAC

    Oakton® Power Adapter, 9VDC to 110VAC

    Oakton Universal AC Power Adapters work globally and come with multiple wall outlet adapters. For use with Oakton meters: pH 11, pH 110, CON 11, CON 110, DO 100, DO 110 110 VAC, 9 VDC, 500mA For up to 200 hours continuous use
    $126.58
    Add to Cart
  • ExStik® Replacement pH Electrode Module PH105

    ExStik® Replacement pH Electrode Module PH105

    Replacement flat surface electrode for ExStik® pH meter PH100. Compatible with ExStik® pH meter PH100 Easy to clean, rugged flat surface pH electrode Interchangeable with ExStik® Chlorine or ORP meters Complete with protective...
    $57.97
    Add to Cart