Product Description
Documentation
| Switch-Tek™ Non-Intrusive Capacitance Level Switch |
| FlowLine Level Switch Series |
| Item Number: LP50 |
The general purpose non-intrusive capacitance level switch is a great choice for highly corrosive or ultra-pure, aqueous based liquids with non-coating and/or scaling characteristics. Media examples include deionized water and hydrochloric acid. The IA relay provides a reliable switch interface with remote devices such as a PlC, SCADA or alram. The sensor is bracket mounted on the exterior wall of non-metallic tanks.
Features:
Non-Intrusive level detection through plastic or fiberglass tank walls with a maximum thickness of 1 inch
PE, PP or PVDF mounting bracket designed for adhesive and plastic tack-weld installation
 |
 |
Specification
| Model |
LP50-1005
|
LP50-5005
|
LP50-6005
|
| Tank Mounting |
Non-intrusive
|
||
| Tank Wall Thick |
< 1 inch (25 mm)
|
||
| Accuracy |
±1 mm in water
|
||
| Repeatability |
±0.5 mm in water
|
||
| Dielectric Range |
> 10 constants
|
||
| Conductive Range |
> 100 micromhos
|
||
| Supply Voltage |
12-36 VDC
|
||
| Consumption |
25 mA maximum
|
||
| Contact Type |
(1) SPST relay
|
||
| Contact Rating |
60 VA
|
||
| Contact Output |
Selectable NO/NC
|
||
| Process Temperature |
-40 to 176°F / -40 to 80°C
|
||
| Enclosure Rating |
NEMA 4X (IP65)
|
||
| Enclosure Material |
PSO
|
||
| Conduit Entrance |
Single, 1/2 inch NPT
|
||
| Bracket Material |
PP
|
PVDF
|
PE
|
| Bracket Mounting |
3M adhesive / plastic thermal weld
|
||
| Cable Jacket Material |
PP
|
||
| Cable Type |
4-conductor, #22 AWG (shielded)
|
||
| Cable Length |
10 ft / 3 m
|
||
| Classification |
General purpose
|
||
| CE Compliance |
EN 61326 EMC
EN 610110-1 Safety |
||