Product Description
What's Included
The following components are standard.
• PortaSens III Gas Detector
• Spare Filters
• 10” Teflon Lined Sampling Wand
• Flowmeter
• USB Cable
• Spare NiMH “D” Cell Battery
• NiMH Battery Charger
• Sensor Keeper
• Calibration “T” Fitting
The D16 does not include sensor modules, please choose from the related products below
Bromine, Chlorine, Chlorine Dioxide, Hydrogen Peroxide, Ozone, Ammonia, Carbon Monoxide
Documentation
Select Specific Sensor for Gas detection.
D16 PortaSens III Portable Gas Leak Detector is a versatile tool for performing regular leak checks in gas storage areas, around process equipment and piping, or in confined spaces prior to entry.
Specifications
-
Range: Dependent on sensor module used
-
Display: Back-lit graphics liquid crystal display
-
Accuracy: Sensor dependent but generally ± 5% of value (limited by cal. gas)
-
Sensitivity: Typically 0.1-1% of sensor module range
-
Outputs: USB transfer of stored gas values
-
Memory: 4 Gb (millions of data points)
-
Storage Interval: Programmable from 1 minute to 60 minutes
-
Typical Capacity: 8 days at 1 minute storage interval
-
Alarms: Three concentration alarms (caution, warning, and alarm with adjustable setpoints) Low flow and low battery alarms Alarms displayed on LCD & Indicated by audible beeper
-
Power: Rechargeable NiMH D cell battery runs about 10 hours continuously. Two D cells supplied with unit. Alkaline D cell battery may also be used.
-
Operating Temp.: -25º to +55ºC
-
Humidity: 0-95% Non-condensing
-
Detector Material: Glass Filled Polycarbonate
-
Size: 3.5”(W) x 9”(H) x 5.5”(D) 89mm x 229mm x 140mm
-
Shipping Weight : 7 lbs. (3.2 Kg.)
