Accessories

Oakton® Replacement Electrode for pH Tester 10, 20 & 30

Replacement Electrode for pH Tester 10, 20 & 30 Double JunctionAlso Works for pH Tester 3 and pH Tester 3+ WD-35624-38. Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample

Paracetic Acid Replacement Reagent, 100 Pack

Peracetic Acid is an organic acid generated by mixing acetic acid and hydrogen peroxide. It appears as a white liquid with a pungent smell and is a highly reactive acid. Due to its germicidal and anti-viral properties, it is extensively employed as a...

Manifold with flow cell for sampling & sensor

The flow cell encases the probe during sample collection and field monitoring, protecting the probe from debris and rough water conditions. The flow cell is suitable for environmental field monitoring and sampling.

pH / ORP Amplifier

PHAMP is a single ended preamplifier that boosts the electrode signal useful and necessary for electrode cables extended longer than 50 ft up to 300 feet. Amplifier has a male BNC on one end and female BNC on the other. A BNC extension cable may be...

Loop Isolator

This unique loop isolator is used to isolate a 4-20mA output. The LPI51 is a loop powered isolator which accepts a 4-20mA signal and creates a proportional output 4-20mA signal. The input and output currents are galvanically isolated from each other...

Submersion/Conduit use Cable Cap Assembly

Submersion/conduit cable with a cable cap assembly. Available in multiple cable sizes from 3 ft to 100 ft. 

PS111 Pressure Switch with Dry Contact

Documentation PS111 quick guide PS111 Pressure Switch Manual PS111, pressure switch with NEMA 4X is designed to make a dry contact in the event of a change in the flow followed by a change of pressure. It may be use as a flow switch. The sensitivity of...

PS110 Pressure Switch with 110 VAC

Documentation PS110 quick guide PS110 Pressure Switch Manual PS110 Pressure Switch receptacle comes with a NEMA 4X switch box with a power 110VAC receptacle to plug in a device. Provided are tubing for inline connection, fittings and power cord...

CL203 Extech Chlorine Reagent Tablets, 10 pack

CL203 are ExTab Chlorine Reagent tablets (10pk-100 tests) for the Extech CL200 Chlorine Meter. Foil packaging provides very stable environment with long shelf life. No messy powder reagents for hassle free calibration of your Extech meter. Includes 10...

CL204 Extech Chlorine Reagent Tablets, 100 pack

CL204 are ExTab Chlorine Reagent tablets (100pk-1000 tests) for the Extech CL200 Chlorine Meter. Foil packaging provides very stable environment with long shelf life. No messy powder reagents for hassle free calibration of your Extech meter.

S16 Storage Solutions

Storage solution ensures that electrode works properly after prolonged storage, overnight storage and between samples. Available in 16 oz bottle or 1 gallon bottle.

Pulse Instruments® ORP 2 point Calibration Kit with Quinhydrone

The Pulse Instruments® ORP 2 point Calibration Kit with Quinhydrone provides a standard known value to calibrate and adjust instruments for higher accuracy and reliability. The kit includes 10g of Quinhydrone, 16 oz. of pH 4.01 and 7.01 calibration...

Auto Degassing Valve

Documentation ADV Brochure ADV Installation manual The new Auto Degassing Valve greatly improves the degassing capabilities of the E-Series metering pumps. The new design uses a dual check valve system to maintain proper pump operation to vent...

BP/PR Valve, PVDF, 1/2” NPT

Documentation Accessories overview brochure BPR Valve manual Fixed BP manual These rugged valves are constructed from PVC, PP, PVDF, or SS components to ensure long life and reliability. The spring loaded PTFE faced diaphragms provide positive discharge...