Product Description
BIOS-01D Flow Based Injection System with Flow and pH Monitoring
| System 1 Flow Based Injection System with Flow and pH Monitoring |
| Pulse Instruments System Series |
| Item Number: BIOS-01D |
Single pass water system where demand based feedback or tank is not available for treatment.
Automatic injection of chemical proportional to the flow rate. A digital flow meter is connected to a digital metering pump that accepts an analog or pulse proportional signal and use to inject liquids such as chemicals, sanitizers or fertilizers at a rate proportional to flow rate.
The faster the flow, the faster the chemical injection, thereby maintaining a constant ratio of chemical to water. The digital flow meter is wall mounted with a digital readout of the flow rate, a re-settable totalizer, and a permanent totalizer. It has two relays for alarm or contact control, and analog and pulse output. The pulse output may be configured to send a selectable number of pulses per gallon. More favored and versatile is to use to the 4-20mA proportional analog signal, that may be easily set to a range of desired flow rate. The chemical metering pump would accept a 4-20mA signal and may also be user scaled to a desired injection output.
Includes
Digital Flow Meter with Rate and Totalizer
pH Monitor in NEMA 4X Enclosure with USB Datalogger
Flow Sensor
pH Electrode
Flow Cell
Chemical Injection Pump
Sampling Pump
Installation Fittings
Pre-wired and Programmed
