Miscellaneous

Stainless Steel Basic Probe (316SS)

The A203 is a 6in (15cm) high temperature immersion probe. Made of 316 stainless steel it is suitable (stainless steel tip only) for temperatures up to 2000F. Compatible with all K-TC units.

Replacement Bead probe: Type K

Replacement bead wire K-thermocouple probe. K-thermoucouples offer unique flexibility in temperature monitoring

Probe Dust Filter

The electronic temperature and humidity sensor is the most critical component on an instrument.  The Dust filter protects that sensor by preventing debris from entering your temperature/humidity probe.  Use of the filter can dramatically extend...

Piercing Probe, 5' coiled cable

The D605 is a 4in (10cm) piercing temperature probe with coiled cable. Made of 316 stainless steel it is suitable for temperatures up to 1650F. Compatible with all K-TC units.

Locking Wall Mount Case

Use the locking wall-mounted case (small) for protecting a logger from tampering when protecting the reliability of your data is important.

Charts for Variable Input Recorder

These 8″ chart come in packs of 60 and are designed for 8″ Chart Recorders. Only genuine Dickson charts are required for your chart recorder to read accurately.   Variable Input Recorder Charts Output Range 24...

Charts for Temp/Hum/Dew Point Recorder

These 8″ chart come in packs of 60 and are designed for 8″ Chart Recorders. Only genuine Dickson charts are required for your chart recorder to read accurately.

Charts for K-Thermocouple remote Sensing Temperature Recorder

These 8″ chart come in packs of 60 and are designed for 8″ Chart Recorders. Only genuine Dickson charts are required for your chart recorder to read accurately.

Charts for ET601 Circular Recorder

These 6″ chart come in packs of 60 and are designed for 6″ Chart Recorders. Only genuine Dickson charts are required for your chart recorder to read accurately.

Straight Extension cable

The D617 is a K-TC straight extension cable. Compatible with all K-TC units. Choose between size 10' and 100'

pH / ORP Amplifier

PHAMP is a single ended preamplifier that boosts the electrode signal useful and necessary for electrode cables extended longer than 50 ft up to 300 feet. Amplifier has a male BNC on one end and female BNC on the other. A BNC extension cable may be...

Loop Isolator

This unique loop isolator is used to isolate a 4-20mA output. The LPI51 is a loop powered isolator which accepts a 4-20mA signal and creates a proportional output 4-20mA signal. The input and output currents are galvanically isolated from each other...

PS111 Pressure Switch with Dry Contact

Documentation PS111 quick guide PS111 Pressure Switch Manual PS111, pressure switch with NEMA 4X is designed to make a dry contact in the event of a change in the flow followed by a change of pressure. It may be use as a flow switch. The sensitivity of...

PS110 Pressure Switch with 110 VAC

Documentation PS110 quick guide PS110 Pressure Switch Manual PS110 Pressure Switch receptacle comes with a NEMA 4X switch box with a power 110VAC receptacle to plug in a device. Provided are tubing for inline connection, fittings and power cord...

CL203 Extech Chlorine Reagent Tablets, 10 pack

CL203 are ExTab Chlorine Reagent tablets (10pk-100 tests) for the Extech CL200 Chlorine Meter. Foil packaging provides very stable environment with long shelf life. No messy powder reagents for hassle free calibration of your Extech meter. Includes 10...